Petak, 28.07.17
Dobro dosli: Gost | RSS
Sport TV Uzivo                Online Igrice                Net TV & Xat Chat                FilmoTeka                Domace Flash TV                Domace VLC TV                World TV
Novi Postovi  *   Pretrazi Postove  *   Clanovi  *   Pravila Forum-a  *   RSS
Page 255 of 500«12253254255256257499500»
Archive - read only
Forum » TV I RADIO » Zakljucane teme » DREAMBOX - 1 ((DreamBox WebControl - Open Webif))
DREAMBOX - 1
rondamon Post broj: 5081 - Nedjelja, 30.11.14, 11:51
Vojnik
Poruka: 2
Status:
Quote herrr ()
Quote rondamon ()
SKY UK - Open Webif - 2 Tuners:
http://adf.ly/ukU4P

Tuner not working (no signal).


herrr, the streaming port 8001 is still working. That's the most important thing. If you have a m3u list with the dreambox links for sky uk, then you still can use the IP
muhammedisa21 Post broj: 5082 - Nedjelja, 30.11.14, 12:01
Zastavnik
Poruka: 194
Status:
Please turkey-turksat
bingobongo Post broj: 5083 - Nedjelja, 30.11.14, 14:04
Major
Poruka: 1183
Status:
Quote tussde ()
Quote bingobongo ()
With the echo command, it is quite easy (for example, you can just insert ^, with the result that the word following ^ will be printed on the new line.

The problem is that VLC commandline options don't support multiline strings. In fact, if you try to insert a multiline string as a parameter, VLC will close without starting streams.

Therefore, I tried to "emulate" a new line string by adding spaces after the epg event (the number of which will change dinamically depending on the characters length of the title event).

Although the string will be still a single line, when displayed on VLC it will look as if formed by two lines:

EVENT: event title
INFO: info title

To get this, feel free to change the subroutine END as it follows:

Code
:END
setlocal enabledelayedexpansion

for %%a in (epg5.txt) do set /a length=%%~za
set /a length -=2
set /a SPC=100-%length%
SET "mychar= "
FOR /l %%i IN (2,1,%SPC%) DO CALL set "mychar=%%mychar%%%mychar%"

call %VLC% --sub-filter marq --marq-marquee="EVENT: %EPG%%mychar%INFO: %INFO%" --marq-size=20 --marq-position=4 --marq-timeout=30000 --fullscreen --aspect-ratio=16:9 "http://XX.XXX.XXX.XX:8001/[stream address]"
del epg*.txt
del info*.txt
if exist piece.txt del piece.txt
exit

I hope it helps

Hi !

The new "subroutine END" works but EVENT and INFO are never displayed properly: i mean sometimes i have

EVENT: (event description)
(some spaces) INFO:(info description)

sometimes i have event and info on the same row with the info description starting on the new row:

EVENT: (event description) (spaces)INFO:
(info description)

I really wanted to have this kind of "structure" (with "I" of info just under "E" of event)

Quote
EVENT: (event description)
INFO: (info description)

but I understand that too many things must be considered (due to vlc lack of multilines display) so even using a dynamic number of spaces the final result is acceptable but not as i expected.

Anyway, i want to thank you bingobongo for your tremendous effort !


As promised, I worked again to improve the script to display correctly the Enigma 2 epg on VLC. This time I have considered the changes of spaces due to the various screen resolution formats (SD, MD, HQ or HD), and a few other occurrances I hadn't noticed before.

So here is my very last version of the script:

---------------------------------------------------------------------------------------------------------

wget -q -O - http://xx.xx.xx.xx/web/zap?sRef=[your stream]
wget -q -O - "http://xx.xx.xx.xx/web/epgservice?sRef=[your stream]" >> epg.txt
type epg.txt | FINDSTR "e2eventtitle" >>epg2.txt
type epg.txt | FINDSTR "e2eventdescriptionextended" >>info.txt
type epg2.txt | cut -d "<" -f 2 >>epg3.txt
type epg3.txt | cut -d ">" -f 2 >>epg4.txt
type info.txt | cut -d "<" -f 2 >>info2.txt
type info2.txt | cut -d ">" -f 2 >>info3.txt
powershell -command "& {get-content epg4.txt -totalcount 1}" >>epg5.txt
powershell -command "& {get-content info3.txt -totalcount 1}" >>infon.txt
set /p EPG=<epg5.txt
call :filesize2 "infon.txt"
:filesize2
set size2=%~z1
if "%size2%"=="2" del infon.txt & goto ALTER
if "%size2%"=="0" del infon.txt & goto ALTER
set /p INFO=<infon.txt
set a=0
goto Sub

:ALTER
type epg.txt | FINDSTR "e2eventdescription" >>info5.txt
type info5.txt | cut -d "<" -f 2 >>info6.txt
type info6.txt | cut -d ">" -f 2 >>info7.txt
powershell -command "& {get-content info7.txt -totalcount 1}" >>infon.txt
set /p INFO=<infon.txt
call :filesize3 "infon.txt"
:filesize3
set size3=%~z1
if "%size3%"=="0" set EPG=not available & set INFO=not available & goto CHECK
goto Sub

:Sub
set /a b=%a%+1
set /a a=%b%
more +%b% infon.txt >>piece.txt
set /p ADD=<piece.txt
call :filesize "piece.txt"
:filesize
set size=%~z1
if "%size%"=="0" del piece.txt & goto CHECK
set INFON=%INFO%%ADD%
set INFO=%INFON%
del piece.txt
goto Sub

:CHECK
wget -q -O - http://xx.xx.xx.xx/web/about >> chk.txt
type chk.txt | FINDSTR "e2servicevideosize" >>chk2.txt
type chk2.txt | cut -d "<" -f 2 >>chk3.txt
type chk3.txt | cut -d ">" -f 2 >>chk4.txt
set /p CHECK=<chk4.txt
if "%CHECK%"=="544x576" goto SD
if "%CHECK%"=="704x576" goto MD
if "%CHECK%"=="720x576" goto HQ
if "%CHECK%"=="1920x1080" goto HD

:SD
set MAX=79
set SIZE=18
goto END

:MD
set MAX=88
set SIZE=20
goto END

:HQ
set MAX=89
set SIZE=20
goto END

:HD
set MAX=203
set SIZE=30
goto END

:END
setlocal enabledelayedexpansion

for %%a in (epg5.txt) do set /a length=%%~za
set /a length -=2
set /a SPC=%MAX%-%length%
SET "mychar= "
FOR /l %%i IN (2,1,%SPC%) DO CALL set "mychar=%%mychar%%%mychar%"
call %VLCA% --sub-filter marq --marq-marquee="EVENT: %EPG%%mychar%INFO: %INFO%" --marq-size=%SIZE% --marq-position=4 --marq-timeout=30000 --fullscreen --aspect-ratio=16:9 "http://xx.xx.xx.xx:8001/[your stream]"
wget -q -O - http://xx.xx.xx.xx/web/powerstate?newstate=0
if exist piece.txt del piece.txt
del epg*.txt
del info*.txt
del chk*.txt
exit

------------------------------------------------------------------------------------------------------

Notice: the fields to edit (with ips and stream values) are marked in red.

Enjoy


Poruku je uredio: bingobongo - Nedjelja, 30.11.14, 14:09
salacue Post broj: 5084 - Nedjelja, 30.11.14, 14:14
Vojnik
Poruka: 45
Status:
Potrebni dreambox nastavci (bez IP adrese) od Polaris-a.
Poslati na PM. Hvala unapred.
pokut Post broj: 5085 - Nedjelja, 30.11.14, 14:55
Vojnik
Poruka: 38
Status:
bingobongo, you need to say step by step before putting this script , what software are required even if you said before but we are lost.
Make a tutorial if you have time.
thanks again for your work.


Poruku je uredio: pokut - Nedjelja, 30.11.14, 15:01
vvaz24 Post broj: 5086 - Nedjelja, 30.11.14, 15:19
Vojnik
Poruka: 63
Status:
Anyone got more Portuguese sources?
muhammedisa21 Post broj: 5087 - Nedjelja, 30.11.14, 16:08
Zastavnik
Poruka: 194
Status:
Please turkey-turksat
tussde Post broj: 5088 - Nedjelja, 30.11.14, 16:30
Vojnik
Poruka: 25
Status:
Quote bingobongo ()
Code
sed s/#/,#/g services.m3u >>services_2.m3u
del services.m3u
sed s/,#/#/g services_2.m3u >>services.m3u
del services_2.m3u
exit

where services.m3u is the name of your playlist

Notice: sed is another tool, like cut, curl, wget etc and need the same dependencies (dlls).


Thanks bingobongo, it works perfectly !

So from what i've understood you used the sed syntax "s/regexp/replacement" where /regexp/ is what i want to substitute and the , before / indicates the creation of a new line (the equivalent of enter button on the keyboard)

Correct me if i'm wrong about this !


Poruku je uredio: tussde - Nedjelja, 30.11.14, 16:39
bingobongo Post broj: 5089 - Nedjelja, 30.11.14, 17:14
Major
Poruka: 1183
Status:
Quote tussde ()
Thanks bingobongo, it works perfectly !

So from what i've understood you used the sed syntax "s/regexp/replacement" where /regexp/ is what i want to substitute and the , before / indicates the creation of a new line (the equivalent of enter button on the keyboard)

Correct me if i'm wrong about this !


You are right about the replacement (in fact the letter "s" stands for "subsitute").
But "," is a simple comma (you can replace it with another character of your choice, if you like).
What really matters is that the chosen character is not a special character producing messages of syntax errors. Comma is not one of them (this is why I have chosen it).
The code for the new line is actually "\n", but here is not needed.
The trick is simply to use sed to remake the channel list, for example by character replacement. Once the playlist is remade, newlines are automatically set in the proper way.
tussde Post broj: 5090 - Nedjelja, 30.11.14, 18:21
Vojnik
Poruka: 25
Status:
Quote bingobongo ()
You are right about the replacement (in fact the letter "s" stands for "subsitute").
But "," is a simple comma (you can replace it with another character of your choice, if you like).
What really matters is that the chosen character is not a special character producing messages of syntax errors. Comma is not one of them (this is why I have chosen it).
The code for the new line is actually "\n", but here is not needed.
The trick is simply to use sed to remake the channel list, for example by character replacement. Once the playlist is remade, newlines are automatically set in the proper way.


Yes, you're right ! In fact i tried this code:

Quote
sed s/#/#/g services.m3u >>services_2.m3u
exit


and i've got a "clean" list as i like !
But this time i have 2 playlists: the original "messy" list (services.m3u) and the "clean" one (services_2.m3u)

So i guess that the "comma trick" (or as you mentioned, any other character that does not produce syntax error) has the aim to have at the end only 1 .m3u with the "clean list" (but with the same name of the original "messy" playlist) !

it's just like sed.exe is able to "recognise" a .m3u and to elaborate it realizing a "tidy structure".

(correct me if i'm wrong)

About your last version of the script:

i tried it but sometimes vlc appears but stream does not load, sometimes stream loads but no epg ( it says "no available")
But the thing i really want to say is that to me your new procedure is too risky because the .bat forces to zap channels ( wget -q -O - http://xx.xx.xx.xx/web/zap?sRef=[your stream])

I know that this is necessary in order to understand the right resolution of the channel (taken using this string: "wget -q -O - http://xx.xx.xx.xx/web/about ") to create the right amount of spaces between EVENT and INFO (correct me if i'm wrong)

It's too risky because if the owner is watching , he can surely see that somebody is changing channel so high chances that he locks or kills the ip !

However thanks for your commitment !


Poruku je uredio: tussde - Nedjelja, 30.11.14, 18:38
teacher Post broj: 5091 - Nedjelja, 30.11.14, 18:50
Zastavnik
Poruka: 135
Status:
Quote
vvaz24 Anyone got more Portuguese sources?


Portugal

Available to users only

@ civilmohamed0016: Please don't steal again these links


Poruku je uredio: teacher - Nedjelja, 30.11.14, 18:58
elsanto1 Post broj: 5092 - Nedjelja, 30.11.14, 19:19
Zastavnik
Poruka: 221
Status:
ok
herrr Post broj: 5093 - Nedjelja, 30.11.14, 22:57
Vojnik
Poruka: 49
Status:
Quote elsanto1 ()
ok

What's OK?
herrr Post broj: 5094 - Nedjelja, 30.11.14, 23:12
Vojnik
Poruka: 49
Status:
Quote rondamon ()
herrr, the streaming port 8001 is still working. That's the most important thing. If you have a m3u list with the dreambox links for sky uk, then you still can use the IP

OK, let's try, but I was thinking device or dish were out of order.
I'm more an hardware man, for me all this is only a curiosity...
I like REAL receivers that you can touch and if something is broken I wish I could go there and fix it...if there's no signal from dish ports can not create it... wink


Poruku je uredio: herrr - Nedjelja, 30.11.14, 23:14
bingobongo Post broj: 5095 - Nedjelja, 30.11.14, 23:13
Major
Poruka: 1183
Status:
Quote tussde ()
i tried it but sometimes vlc appears but stream does not load


I'm not sure this issue depend on the script (if VLC starts without showing anything, it means that problably the selected channel doesn't work for streaming)... or maybe it's the zapstream, which is enabled while the owner is already watching something else wink (so I recommend to try the script only when stb is in stand-by position)

Quote tussde ()
sometimes stream loads but no epg ( it says "no available")


This is a new option added in case Enigma 2 epg is not available. In fact when Enigma 2 epg is unavailable and you visit the web interface address, you'll see the writing "Current playing: Title Channel - N/A."

Quote tussde ()
It's too risky because if the owner is watching , he can surely see that somebody is changing channel


If you don't enable zapstream, when you type "http://IP/web/about" you won't be able to read any info about the screen resolution is going to be adopted. And this will cause problems with what you wanted to see: INFO under EPG.
But, above all, it will cause problems when you're going to view the epg of HD channels.

A workaround could be the one of mapping all the channels resolutions and change epg spaces depending on the channel you're going to view, but this would require too much time.. because I need to consider the screen resolution of all the world channels... glom!

So feel free to let me know which bouquets you usually view, and I will add an option for the screen resolution of these channels in order to avoid enabling zapstream.


Poruku je uredio: bingobongo - Nedjelja, 30.11.14, 23:20
elsanto1 Post broj: 5096 - Nedjelja, 30.11.14, 23:42
Zastavnik
Poruka: 221
Status:
ok,,,
bughy29 Post broj: 5097 - Ponedjeljak, 01.12.14, 08:33
Vojnik
Poruka: 33
Status:
Quote civilmohamed0016 ()
civilmohamed0016

don't open , another spam
The real openwebif is: http://46.127.84.239/


Poruku je uredio: bughy29 - Ponedjeljak, 01.12.14, 08:34
slackwareful Post broj: 5098 - Ponedjeljak, 01.12.14, 13:15
Vojnik
Poruka: 91
Status:


Poruku je uredio: slackwareful - Ponedjeljak, 01.12.14, 13:20
bingobongo Post broj: 5099 - Ponedjeljak, 01.12.14, 13:15
Major
Poruka: 1183
Status:
Quote bingobongo ()
So feel free to let me know which bouquets you usually view, and I will add an option for the screen resolution of these channels in order to avoid enabling zapstream.


No need of that, sorry. I'm studying an alternative way to foresee the screen resolution changes.
I need time, but I'm on the right way
tussde Post broj: 5100 - Ponedjeljak, 01.12.14, 16:44
Vojnik
Poruka: 25
Status:
Hi!

about epg:

i discovered that simple tv player allows to load rytec files to have epg;
the problem is that when i try to load a rytec file (such as http://www.vuplus-community.net/rytec/rytecxmltvcsat.gz ) simple tv gives this :

Quote
Error to read XML data(can't download file)(800c0005)


Any idea about this issue ? (I've windows vista 32 bit)

I hope somebody will help.


Poruku je uredio: tussde - Ponedjeljak, 01.12.14, 16:47
Forum » TV I RADIO » Zakljucane teme » DREAMBOX - 1 ((DreamBox WebControl - Open Webif))
Page 255 of 500«12253254255256257499500»
Search:

Forum Chat Samo reg. clanovi imaju pristup CHAT BOX-u
-"TOP 25 FORUMASA"-
Gledanje Pay TV kanala bez valjane pretplate je ilegalno, sve datoteke/informacije ovdje su samo za obrazovne svrhe.
Watching Pay TV channels without a valid subscription is illegal , all files/information here are only for educational purposes only.
Converter M3U Playlists Provjerite protok Playlist